PELAYANAN PENGUJIAN PIPA HDPE UNTUK APLIKASI SALURAN AIR BAWAH TANAH

Authors

  • Tubagus Noor Rohmannudin Sepuluh Nopember Institute of Technology
  • Sulistijono . Sepuluh Nopember Institute of Technology
  • Budi Agung Kurniawan Sepuluh Nopember Institute of Technology
  • Lukman Noerochiem Sepuluh Nopember Institute of Technology
  • Willy Deviet Kusuma Sepuluh Nopember Institute of Technology

DOI:

https://doi.org/10.14414/kedaymas.v3i1.3571

Keywords:

HDPE, Hydrostatic pressure, tensile test, expansion test

Abstract

The material chemistry laboratory is a laboratory which having facilities to provide teaching, research, and community dedication. One example of community dedication that the material chemistry laboratory does is by giving testing and research service to a certain institution. In this service, testing regarding HDPE pipe quality that will be applied for underground waterways is done. HDPE is a plastic material with flexible and impact-resistant properties. this material is commonly used in the industrial world, especially as a main material for pipes. In the pipe production process, good qualification of pipe is necessary. To determine the quality of the HDPE pipe, a hydrostatic pressure test, tensile test, and expansion test is done. after the testing, the result obtained for the hydrostatic pressure test is in good condition, and for the tensile test and expansion test the result is in accordance with the quality requirement of SNI 4829.2 : 2015.

Author Biographies

  • Tubagus Noor Rohmannudin, Sepuluh Nopember Institute of Technology
    Materials and Metallurgical Engineering
  • Sulistijono ., Sepuluh Nopember Institute of Technology
    Materials and Metallurgical Engineering
  • Budi Agung Kurniawan, Sepuluh Nopember Institute of Technology
    Materials and Metallurgical Engineering
  • Lukman Noerochiem, Sepuluh Nopember Institute of Technology
    Materials and Metallurgical Engineering
  • Willy Deviet Kusuma, Sepuluh Nopember Institute of Technology
    Materials and Metallurgical Engineering

References

Amjadi, Mohammad & Fatemi, Ali. (2020). Tensile Behavior of High-Density Polyethylene Including the Effects of Processing Technique, Thickness, Temperature, and Strain Rate. Polymers. 12. 10.3390/polym12091857.

ASTM Internasional. 2010. ASTM D638 Standard Test Methods for Tensile Properties of Plastic. In Journal of America Society for Testing and Material 14. P. 1-17.

Shaofeng Li, K. Q. (2014). The Mechanical And Fracture Property Of Hdpe-Experiment Result Combined With Simulation. Karlskrona, Sweden: Department Of Mechanical Engineering.

SNI (Standar Nasional Indonesia). 2015. SNI 4829.2:2015 : Sistem perpipaan plastik - Pipa polietilena (PE) dan fiting untuk sistem penyediaan air minum - Bagian 2: Pipa (ISO 4427-2:2007, MOD)

Widojoko, L. (2009). Kontrol Keawetan Pipa High Density Polyethylene (Hdpe) Berdasarkan Standard Nasional Indonesia Sni 06- 4829-2005. Konferensi Nasional Teknik Sipil 3

Downloads

Published

2023-01-12

How to Cite

PELAYANAN PENGUJIAN PIPA HDPE UNTUK APLIKASI SALURAN AIR BAWAH TANAH. (2023). Jurnal KeDayMas: Kemitraan Dan Pemberdayaan Masyarakat, 3(1), 74-79. https://doi.org/10.14414/kedaymas.v3i1.3571